ISO 10816-4:2009

Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 4: Gas turbine sets with fluid-film bearings

ISO 10816-4:2009 establishes specific provisions for evaluating the severity of in-situ, broad-band vibration measured radial (i.e. transverse) to the shaft axis on all main bearing housings or pedestals and in the axial direction on thrust bearings. These are in terms of:

– vibration under normal steady-state operating conditions;

– vibration during other (non-steady-state) conditions when transient changes are taking place, including run up or run down, initial loading and load changes;

– changes in vibration which can occur during normal steady-state operation.

ISO 10816-4:2009 is applicable to heavy-duty gas turbine sets used in electrical and mechanical drive applications, with fluid-film bearings, outputs greater than 3 MW and an operating speed range under load between 3 000 r/min and 30 000 r/min.

Edition	2009
Standard Part No	4
Published Date	2009
Published By	International Standardization Organisation
Page Count	16