ISO 12714:1999

Non-destructive testing — Acoustic emission inspection — Secondary calibration of acoustic emission sensors

This International Standard specifies a method for the secondary calibration of acoustic emission sensors as

receivers of elastic waves at the surface of a solid medium. The International Standard is applicable to laboratory

tertiary standard sensors and acoustic emission applications sensors.

The secondary calibration yields the frequency response of a sensor to waves of a type normally encountered in

acoustic emission work, namely Rayleigh waves. The source producing the signal used for the calibration is

mounted on the same surface of a test block as the sensor under test (SUT). The sensitivity of the sensor is

determined for excitation within the range of 100 kHz to 1 MHz. Sensitivity values are usually determined at

frequencies approximately 10 kHz apart. The units of the calibration are volts per unit of mechanical input

(displacement, velocity or acceleration).

Edition	1999
Published Date	1999
Published By	International Standardization Organisation
Page Count	16