ISO 16818:2008
Building environment design — Energy efficiency — Terminology
Building environment design — Energy efficiency — Terminology
- Pages
- 40
- Latest Standard
- ISO 16818:2008
Referenced standards
ISO 13789ISO 13790ISO 15927-6ISO 16813ISO 6707-1ISO 7345ISO 7730ISO 9229ISO 9251ISO 9288ISO 9346
Unit PriceUSD 155.00
USD120.90Save 22%
Building environment design — Energy efficiency — Terminology
ISO 16818:2008 gives terms and definitions for use in the design of energy efficient buildings. ISO 16818:2007 is applicable to new buildings and retrofitted existing buildings.
| Edition | 2008 |
|---|---|
| Published Date | 2008 |
| Published By | International Standardization Organisation |
| Page Count | 32 |
- Standard Number
- ISO 16818:2008
- Edition
- 2008
- Publication Year
- 2008
- Pages
- 40
- Latest Standard
- ISO 16818:2008
- Category
- ISO
- installed interior lighting power
- integrated part-load value
- interior lighting power allowance
- interior unit lighting power allowance
- insolation
- isolation device
- lamp
- lamp, compact fluorescent
- lamp, fluorescent
- lamp, general service
- lamp, HID
- lamp, incandescent
- lamp, reflector
- lamp/ballast efficacy
- lamp efficacy
- lamp lumens
- lamp wattage
- lighting, decorative
- lighting power allowance
- lighting power budget
- lighting power control credit
- lighting power density
- lighting system
- lumen
- lumen maintenance control
- luminaire
- manual
- marked rating
- mean daily temperature
- mechanical heating
- mechanical refrigeration
- motor efficiency, minimum
- motor efficiency, nominal
- motor power, rated
- net thermal efficiency, generation
- non-recirculating system
- occupancy sensor
- opaque
- opaque areas
- optimum start controls
- orientation
- packaged terminal air conditioner
- packaged terminal heat pump
- party wall
- permanently installed
- performance indicator
- piping
- plenum
- power
- power adjustment factor
- power factor
- prescribed assumption
- primary air system
- primary energy
- primary energy efficiency
- process energy
- projection factor
- proposed design
- prototype building
- pump system energy demand
- radiant comfort heating
- radiant heating system
- rated lamp lumens
- rated lamp wattage
- rated motor power
- readily accessible
- recirculating system
- recooling
- recoverable energy
- reference building
- reflectance
- reheating
- reset
- room air conditioner
- room area
- room cavity ratio
- sash crack
- sequence
- service systems
- service water heating
- service water heating demand
- setback
- set-point temperature
- shell building
- single-zone system
- site-recovered energy
- site-solar energy
- slab-on-grade floor
- heated slab-on-grade floor
- unheated slab-on-grade floor
- solar energy source
- solar heat gain coefficient
- space
- standard energy calculation procedure
- standby loss
- substantial contact
- tandem wiring
- task lighting
- task conditioning
- task location
- technical building systems
- terminal
- terminal element
- thermal block
- thermal mass
- thermal zone
- thermostat
- thermostatic control
- tinted glazing
- total lighting power allowance
- unit energy costs
- unit lighting power allowance
- unit power density
- unitary cooling equipment
- unitary heat pump
- variable air volume system
- vent damper
- ventilation
- ventilation air
- wall
- warm-up
- water economizer
- water heater
- window-to-wall ratio
- zone, HVAC
- access hatch
- accessible
- adjusted lighting power
- adopting authority
- air-conditioned floor area
- air-conditioned space
- air economizer
- air handling unit
- building
- building energy cost
- building envelope
- building exit
- building type
- check metering
- clerestory
- coefficient of performance
- coefficient of utilization
- conditioned space
- continuous insulation
- control
- control device
- control loop, local
- control point
- cool down
- cooling
- cooling design temperature
- cooling design wet-bulb temperature
- daylit area
- daylit space
- daylit zone
- daylight sensing control
- dead band
- default assumption
- degree-day
- dehumidification
- demand, electric
- demand energy
- design capacity
- design conditions
- design energy consumption
- design energy costs
- direct digital control
- distribution system
- efficiency
- efficiency, HVAC system
- electric meter
- electric supplier
- emittance
- enclosed space
- energy
- energy carrier
- energy cost
- energy cost budget
- energy efficiency ratio
- energy efficiency ratio for buildings
- energy factor for water heater
- energy management system
- energy need for heating or cooling
- energy need for domestic hot water
- energy performance of a building
- energy, recovered
- energy resource
- energy use for space heating and cooling
- envelope performance factor
- envelope performance factor, base
- envelope performance factor, proposed
- enthalpy
- equipment
- exfiltration
- exterior building envelope
- exterior envelope
- exterior lighting power allowance
- external air
- facade area, vertical
- feeder conductor
- fenestration
- fenestration, vertical
- fixture
- floor area, gross
- floor area, gross building envelope
- floor area, gross conditioned
- floor area, gross lighted
- general lighting
- fan system energy demand
- glazed wall system
- gross exterior wall area
- gross floor area over outside unconditioned space
- gross roof area
- gross wall area
- gutter
- heat
- heated space
- heating degree-day
- heating design temperature
- heating seasonal performance factor
- historic building
- humidistat
- heating, ventilating, air-conditioning system
- luminance
- indirectly conditioned space
- infiltration