ISO 16890-3:2024

Air filters for general ventilation — Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured

This document specifies the test equipment and the test methods used for measuring the gravimetric efficiency and resistance to air flow of air filter for general ventilation.

It is intended for use in conjunction with ISO?16890-1, ISO?16890-2 and ISO?16890-4.

The test method described in this document is applicable for air flow rates between 0,25?m³/s (900?m³/h, 530?ft³/min) and 1,5?m³/s (5?400?m³/h, 3?178?ft³/min), referring to a test rig with a nominal face area of 610?mm?×?610?mm (24?in?×?24?in).

This document refers to particulate air filter elements for general ventilation having an ePM₁ efficiency less than or equal to 99?% and an ePM₁₀ efficiency greater than 20?% when tested as per the procedures defined in the ISO?16890 series.

NOTE??????????? The lower limit for this test procedure is set at a minimum ePM₁₀ efficiency of 20?% since it is very difficult for a test filter element below this level to meet the statistical validity requirements of this procedure.

This document does not apply to filter elements used in portable room-air cleaners.

Edition	2024
Standard Part No	3
Published Date	2024
Published By	International Standardization Organisation
Page Count	22