ISO 17378-1:2014
Water quality — Determination of arsenic and antimony — Part 1: Method using hydride generation atomic fluorescence spectrometry (HG-AFS)
Water quality — Determination of arsenic and antimony — Part 1: Method using hydride generation atomic fluorescence spectrometry (HG-AFS)
Referenced standards
PREVIEW
Water quality — Determination of arsenic and antimony — Part 1: Method using hydride generation atomic fluorescence spectrometry (HG-AFS)
Water quality — Determination of arsenic and antimony — Part 1: Method using hydride generation atomic fluorescence spectrometry (HG-AFS)
ISO 17378-1:2014 specifies a method for the determination of arsenic and antimony. The method is applicable to drinking water, surface water, ground water and rain water. The linear application range of ISO 17378-1:2014 is from 0,02 μg/l to 100 μg/l. Samples containing arsenic or antimony at higher concentrations than the application range can be analysed following appropriate dilution.
Generally sea water is outside the scope of ISO 17378-1:2014. Sea water samples can be analysed using a standard additions approach providing that this is validated for the samples under test. The method is unlikely to detect organo-arsenic compounds or organo-antimony compounds.
The sensitivity of this method is dependent on the selected operating conditions.
| Edition | 2014 |
|---|---|
| Standard Part No | 1 |
| Published Date | 2014 |
| Published By | International Standardization Organisation |
| Page Count | 20 |