ISO 389-7:2005

Acoustics — Reference zero for the calibration of audiometric equipment — Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions

Acoustics — Reference zero for the calibration of audiometric equipment — Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions

Digital Document2005 edition2005Purchase Options

Referenced standards

GB/T 16296-1996GB/T 16402-1996GB/T 16403-1996GB/T 3240GB/T 4854.1-2004GB/T 4963-2007
Unit Price
USD50.70Save 22%
USD 65.00

Acoustics — Reference zero for the calibration of audiometric equipment — Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions

ISO 389-7:2005 specifies a reference threshold of hearing for the calibration of audiometric equipment used under the following conditions.

  1. The sound field in the absence of the listener consists of either a free progressive plane wave (free field) or a diffuse sound field, as specified in ISO 8253-2. In the case of a free field, the source of sound is directly in front of the listener (frontal incidence).
  2. The sound signals are pure (sinusoidal) tones in the case of free-field conditions and one-third octave bands of (white or pink) noise in the case of diffuse-field conditions.
  3. The sound pressure level is measured in the absence of the listener at the position where the centre of the listener’s head would be.
  4. Listening is binaural.

The data in ISO 389-7:2005 are given in numerical form for the preferred frequencies in the one-third octave series from 20 Hz to 16 000 Hz inclusive in accordance with ISO 266 and, in addition, for some intermediate audiometric frequencies up to 18 000 Hz.

The threshold data differ from the audiometric zero specified in ISO 389-1, ISO 389-2, ISO/TR 389-5 and ISO 389-8, since the latter refer to monaural listening through earphones with sound pressure levels referred to specified couplers and ear simulators. Direct comparison between the data in the parts of ISO 389 mentioned above and that in ISO 389-7:2005 is therefore not appropriate.

Edition2005
Standard Part No7
Published Date2005
Published ByInternational Standardization Organisation
Page Count10