ISO 9270-1:2010
7/24 taper spindle noses for automatic tool changers — Part 1: Dimensions and designation of spindle noses of forms S and SF
7/24 taper spindle noses for automatic tool changers — Part 1: Dimensions and designation of spindle noses of forms S and SF
Referenced standards
Unit PriceUSD 65.00
USD50.70Save 22%
PREVIEW
ISO 9270-1:2010Loading preview...
ISO 9270-1:2010
7/24 taper spindle noses for automatic tool changers — Part 1: Dimensions and designation of spindle noses of forms S and SF
7/24 taper spindle noses for automatic tool changers — Part 1: Dimensions and designation of spindle noses of forms S and SF
ISO 9270-1:2010 specifies the dimensions and tolerances of 7/24 taper spindle noses with tenons for automatic tool changers, intended for use with the corresponding tool shanks of forms A, AD, AF, U, UD and UF according to ISO 7388-1.
| Edition | 2010 |
|---|---|
| Standard Part No | 1 |
| Published Date | 2010 |
| Published By | International Standardization Organisation |
| Page Count | 8 |